Ecoer 2436 Installation Instructions Manual page 22

ESI Outdoor Unit Installation Instruction
Mode list (SEG3 Display)
Stand by without running signal(Y=OFF)
→State Code (SEG3): 0
Wait to start after receiving running signal(Y=ON)
(6 minutes for pressure equalization to restart)
→State Code (SEG3): 1
Cooling running
→State Code (SEG3): 2
Heating running
→State Code (SEG3): 3
Oil return
→State Code (SEG3): 4
Defrost
→State Code (SEG3): 5
Forced defrost
→State Code (SEG3): 6
Test mode 7
→State Code (SEG3): 7
Test mode 8
→State Code (SEG3): 8
Manufacturer reserves the right to change specifications or designs without notice.
22/31
www.ecoer.com
SEG1 SEG2 SEG3
SEG1 SEG2 SEG3
SEG1 SEG2 SEG3
SEG1 SEG2 SEG3
SEG1 SEG2 SEG3
SEG1 SEG2 SEG3
SEG1 SEG2 SEG3
SEG1 SEG2 SEG3
SEG1 SEG2 SEG3
08.2018