Electrical - High Voltage - Ecoer 2436 Installation Instructions Manual

ESI Outdoor Unit Installation Instruction
11. Electrical – High Voltage
11.1 High voltage power supply
During installation, testing, servicing, and trouble-
shooting of this product, it may be necessary to
work with live electrical components. Failure to
follow all electrical safety precautions when
exposed to live electrical components could result
in death or serious injury.
The high voltage power supply must agree with the
equipment nameplate. Power wiring must comply with
National, State and Local codes.
Follow instructions on unit wiring diagram located on
the inside of the control box cover.
Model
2436
4860
11.2 High voltage disconnect switch
Install a separated disconnect switch at the outdoor unit.
Field provided flexible electrical conduit must be used for
high voltage wiring.
11.3 High voltage ground
Ground the outdoor unit according to National, State, and
Local code requirements.
Manufacturer reserves the right to change specifications or designs without notice.
WARNING
Voltage
208/230V-1Ph-60Hz
208/230V-1Ph-60Hz
14/31
Figure 11-1 Read the Warning Label
Power Supply
MCA
24.4A
32.5A
Figure 11-2 Install an independent switch
Figure 11-3 Unit grounding
www.ecoer.com
Switch Size
40A
50A
08.2018