Cessna TR182 1979 Pilot Operating Handbook page 326

CESSNA 400 TRANSPONDER, PILOT'S OPERATING HANDBOOK
AND ENCODING ALTIMETER SUPPLEMENT
SECTION 2
LIMITATIONS
There is no change to the airplane limitations when this avionic
equipment is installed.
SECTION 3
EMERGENCY PROCEDURES
TO TRANSMIT AN EMERGENCY SIGNAL:
1. Function Switch -- ON.
2. Reply-Code Selector Switches -- SELECT 7700 operating code.
TO TRANSMIT A SIGNAL REPRESENTING LOSS OF ALL
COMMUNICATIONS (WHEN IN A CONTROLLED ENVIRONMENT):
1. Function Switch -- ON.
2. Reply-Code Selector Switches -- SELECT 7700operating code for 1
minute; then SELECT 7600 operating code for 15minutes and then
REPEAT this procedure at same intervals for remainder of flight.
SECTION 4
NORMAL PROCEDURES
BEFORE TAKEOFF:
1. Function Switch -- SBY.
. TO TRANSMIT MODE A (AIRCRAFT IDENTIFICATION) CODES IN
FLIGHT:
1. Reply-Code Selector Switches -- SELECT assigned code.
4
1 October 1978