Cessna TR182 1979 Pilot Operating Handbook page 301

PILOT'S OPERATING HANDBOOK CESSNA 400 MARKER BEACON
SUPPLEMENT (TYPE R-402A)
SECTION 2
LIMITATIONS
There is no change to the airplane limitations when this avionic
equipment is installed,
SECTION 3
EMERGENCY PROCEDURES
There is no change to the airplane emergency procedures when this
avionic equipment is installed.
SECTION
4
NORMAL PROCEDURES
TO OPERATE:
1. OFF/VOL Control-- VOL position and adjust to desired listening
level.
2. HIILO Sens Switch -- SELECT HI position for airway flying or LO
position for ILS approaches.
3. SPKR/PHN Switch -- SELECT speaker or phone audio.
4. TEST Switch -- PRESS and ensure that marker beacon indicator
lights are operative.
5. BRT Control-- SELECT BRT (full clockwise). ADJUST as desired
when illuminated over marker beacon.
SECTION 5
PERFORMANCE
There is no change to the airplane performance when this avionic
equipment is installed. However, the installation of an externally mounted
antenna or several related external antennas, will result in a minor
reduction in cruise performance.
1 October 1978
3/(4 blank)