WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the stand.
2
Remove the
back
cover.
Procedure
1
Remove the five (M3x5) screws that secure the system-board shield to the display-assembly base.
2
Lift the system-board shield off the display-assembly base.
Removing the system-board shield
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Removing the system-board shield
12
29