WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
NOTE:
The following procedure applies only to computers that are shipped with an articulating stand.
Align the tabs on the stand with the slots on the back cover and snap the stand into place on the back cover.
Procedure
NOTE:
The following procedure applies only to computers that are shipped with a pedestal stand.
1
Align the tabs on the stand with the slots on the back cover, slide the stand into the slots, and then snap it into place.
2
Replace the two screws (M3x5) that secure the stand to the back cover.
computer. After working inside your computer, follow the instructions in
Replacing the stand
www.dell.com/
Replacing the stand
5
After working inside
17