Replacing The System-Board Shield; Procedure; Post-Requisites - Dell Inspiron 24 5000 All-in-One Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align and place the screw holes on the system-board shield with the screw holes on the display-assembly base.
CAUTION: Before replacing the screws, ensure that cables connected to the system board are not being pinched.
2 Replace the five screws (M3x5) that secure the system-board shield to the display-assembly base.

Post-requisites

1 Replace the back cover.
2 Replace the stand.
30

Replacing the system-board shield

Replacing the system-board shield
computer. After working inside your computer, follow the instructions in
13
After working inside
www.dell.com/