Removing The Stand; Procedure - Dell Inspiron 24 5000 All-in-One Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

NOTE: The following procedure applies only to computers that are shipped with an articulating stand.
CAUTION: Place the computer on a flat, soft and clean surface to avoid damaging the display.
1 Push the release tab.
2 Hold the tab in the release position and lift the stand off the back cover.
Procedure
NOTE: The following procedure applies only to computers that are shipped with a pedestal stand.
CAUTION: Place the computer on a flat, clean, and even surface to avoid damaging the display.
1 Using a plastic scribe, pry the stand cover away from the back cover.
computer. After working inside your computer, follow the instructions in

Removing the stand

www.dell.com/
Removing the stand
4
After working inside
15