WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Starting from the location shown, slide and align the middle frame to the slots on the display-assembly base, and then snap the middle
frame into place on the display-assembly base.
2
Replace the 17 screws (M3x5) that secure the middle frame to the display-assembly base.
NOTE:
The screws that secure the middle frame to the display-assembly base are black in color and etched with "BP"
around the screw holes.
Replacing the middle frame
computer. After working inside your computer, follow the instructions in
51
After working inside
www.dell.com/
Replacing the middle frame
85