Quantum StorNext QD7000 Hardware Manual page 24

5. Host adapters
6. Controller A
7. Controller B
8. Controller-drive tray for the storage array
When you use out-of-band management , the storage management station is connected through an
Ethernet network to each of the controllers in the controller shelf or controller-drive tray. E2800 and
E5700 controller shelves can use out-of-band management with SANtricity System Manager. E2800
and E5700 controller shelves might also use the SANtricity Storage Manager Enterprise
Management Window (EMW) with either management method. Out-of-band management is an
optional alternative to in-band management for all other models of controller-drive trays.
1. Ethernet network
2. User workstations sending and receiving data
3. Storage management station
4. Host
5. Host adapters
6. Controller A
7. Controller B
8. Controller shelf (controller-drive tray)
9. Ethernet cable from the controllers to the ethernet network
With out-of-band management, a Dynamic Host Configuration Protocol (DHCP) server is
recommended for assigning IP addresses and other network configuration settings. A DHCP server
provides the network administrators the ability to manage and automatically assign IP addresses. If a
DHCP server is not used, you must manually configure the controllers. For more information, see
SANtricity Power Guide for Advanced Users for your operating system or the "Adding a Host or
Storage Array" online help topic in the Enterprise Management Window.
2
2
1
4
5
9
6
8
Cabling concepts and best practices | 15
2
3
5
9
7
78034-00