Quantum StorNext QD7000 Hardware Manual page 126

Hardware installation for Synchronous Mirroring and Asynchronous Mirroring | 117
Controller port A2 and controller port B2 are reserved for mirror relationship
Note:
synchronization upon activation of the Synchronous Mirroring feature. In a four-host-port
system, controller port A4 and controller port B4 are reserved.
The primary site cabling is now complete.
10. Determine whether the secondary site cabling complete.
• If not, repeat Step
• If so, go to Step
11. Complete the fabric environment for switch 1 by connecting switch 1A to switch 1B.
The following figure shows the cabling that is described in Step
page 118.
84004-02
0 2 4 6 8
Zone 1 Zone 2
1 3 5 7
9
0 2 4 6 8
Zone 1 Zone 2
1 3
5 7 9
1
on page 115 through Step
11
on page 117.
Fabric 1
Switch 1A
10 km Maximum
10 12 14
11 13 15
Zone 3
Zone 4
Switch 2A Fabric 2
10 km Maximum
10 12 14
11
13 15
Zone 3
Zone 4
9
on page 116 for the secondary site.
11 on page 117 and Step
Switch 1B
16 18 20 22 24 26 28
Zone 1 Zone 2
17 21 23 25 27 29
19
Switch 2B
16 18 20 22 24 26 28
Zone 1 Zone 2
17 21 23 25 27 29
19
12 on
30
31
Zone 3
Zone 4
30
31
Zone 3
Zone 4