Cleaning & Protecting - Sea Eagle RazorLite 393rl Instruction & Owner's Manual

RazorLite Kayaks | DEFLATION
Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • Staff@SeaEagle.com
Fold one wall over the
other. Push the floor in
between the walls for a
tight, compact fold.
Tip: Keep the backpack
near by for size reference.
Push the skeg base down
flat to prevent it from
bending and becoming
misshaped.
Make the 1st fold at the
capacity plate.
RazorLite Kayaks | CLEANING & PROTECTING
Dry after each use to avoid mold. While washing or
rinsing: close the valve and twist the cap on so water
cannot not enter the chamber. Sea Eagles can be cleaned
very effectively with general purpose cleaning products and a
scrub brush. Towel dry.
Protection from the Sun and Heat
Avoid leaving the boat in direct sunlight when ashore.
Temperatures on a beach, dock, davit, etc. can get very high,
which could affect the vinyl or glue. Excessive exposure to sun
and heat can cause your Sea Eagle to become sticky or cause
the glue to fail.
Treat the boat with a UV protectant such as 303 Aerospace
Protectant. Generally, protectants are a thin film of oil, which
will help keep your Sea Eagle clean. Avoid applying protectant
on the EVA pad or places where foot traction is needed.
Treated boat will repel sand, water scum and tar stains.
Fold the bow in, then fold
the kayak on top of itself.
Both nosecones should be
folded inside and
protected by the kayak
walls.
Slide the kayak into the
backpack. Paddle, seat,
foot rest and pump will fit
in the bag, also.
The 473RL will fit more
snuggly in the backpack
due to it's larger size.
8