Related Manuals for Sea Eagle SailCat 14SC
Summary of Contents for Sea Eagle SailCat 14SC
- Page 1 Sea Eagle SailCat 14SC Instruction & Owner’s Manual For video instructions visit SeaEagle.com/instructions Sea Eagle Boats Inc. 19 N. Columbia Street, Suite 1 Port Jefferson, NY 11777 1-800-748-8066 Aug 2012...
-
Page 2: Return Policy
All merchandise sent to us for exchange or refund must be clean, dry, and own state sales tax on your Sea Eagle if you did not previously pay sales in good working condition overall. A cleaning charge of $25 will be incurred tax at the time of purchase. -
Page 3: Packing List
Operating Your Sea Eagle Packing List All orders placed directly with Sea Eagle come with a picking ticket that Sailing lists all of the items shipped with your order. We HIGHLY RECOMMEND The limited space of this instruction manual that you inspect all packages that you receive to ensure that everything does not allow us to cover all the fine points of has arrived in good fashion. - Page 4 OFF buttons. Adjust the pressure dial to read 3.2 PSI which is the operating pressure for your Sea Eagle. Adjust the pressure dial to 3.2 PSI which is the operating pressure for your Sea Eagle. PSI is marked in red on the dial.
- Page 5 (car or marine battery) using the alligator clips Leeboards at the end of the extension cord. Connect the The Sea Eagle SailCat is equipped with two red to the positive pole and the black to the leeboards which are used to reduce sideways negative pole.
-
Page 6: Assembly & Inflation
Oar Pin The oar pin secures the steering oar to the Assembly & Inflation rudlock. Tools You will need two wrenches, either adjustable or metric, or a metric socket set. Pre-Assembly: Oar/Rudder Your 14SC has some items that are installed once and can remain in Your SailCat comes with a 7’... - Page 7 Once the underbars and sleeves are in place, partially inflate the pontoons until they have shape but the underbars and benches can still be adjusted. Instructions on inflating your Sea Eagle are detailed on page 2 of this manual under the heading Inflation: Valves and Pumps.
- Page 8 If the floor has a wrinkle or does not fit well, adjust the cross benches and/or slide the fab- ric in its grooves. Next, locate the batten sleeve in the sail and insert the batten. The batten is a fiberglass rod Make any final adjustments to the floor and with a white eyelet.
- Page 9 Rigging the Sail Hook the brass clip that is closest to the knot onto the rope that is tied to the rudlock. Once the mast is up, take one of the 24” ropes and run it through the grommet on the sail that is closest to the mast.
-
Page 10: Troubleshooting
Sea Eagle’s “Boating Safety Ba- sics.” Boating Safety Basics are printed on the side of each Sea Eagle boat. - Page 11 TIPS: Make sure the surface is both clean and dry before adhesion. Do DO NOT remove a valve unless you are sure not use sandpaper on your Sea Eagle. Make sure the boat is deflated be- it is broken. Under most circumstances the fore repairing air leaks.
-
Page 12: Care And Maintenance
4 AA batteries (not included). Care & Maintenance Your Sea Eagle is very easy to care for and takes very little maintenance. Waterproof Bag The Sea Eagle can be stored either inflated or deflated, if you are leaving This 13 1/2”...
Need help?
Do you have a question about the SailCat 14SC and is the answer not in the manual?
Questions and answers