Sea Eagle RazorLite 393rl Instruction & Owner's Manual page 6

RazorLite Kayaks| ASSEMBLY & INFLATION
Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • Staff@SeaEagle.com
Install FlexBrace pedals.
Slide aluminum rod into
front hole (closest to the
Sea Eagle logo).
Select correct pedal, slide it
all the way forward to end
of the rod.
Bend the pad with one
hand and pull rod into its
hole with the other hand. If
rod does not fully engage
hole, release pad and use
both hands to squeeze end
of rod to pad until it slides
in hole. Use care not to
bend the rod.
After inflation, adjust pedal
for comfort and best
bracing, raise pedal and
slide it along the bar.
Note setting number and
match it on the other side.
Inflate the sides and floor
(in no particular order).
The working pressure for
all chambers is 10 PSI.
Skeg
The removable skeg helps
control yaw and improves
paddling speed.
Turn the kayak over and
slide the skeg into the base.
It only slides in facing one
way. Slide the locking tab
into its groove until it clicks
into place.
If the skeg does not slide in,
do not force it. Refer to an
easy fix on page 10.
Tall Back Seat
The TBS is made of
thermal molded foam.
Featuring a storage pouch
on the back with built in
zipper, the TBS provides
great lumbar support with
an 18" high back rest.
5