Sea Eagle RazorLite 393rl Instruction & Owner's Manual page 11

RazorLite Kayaks| REPAIRS
Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • Staff@SeaEagle.com
PVC Based Glue
To patch your Sea Eagle,
use an adhesive for PVC
boats.
Plumber's cement, epoxy,
Flex Seal, waterpoofing
sprays and Gorilla Glue do
not work.
Pinholes
Deflate the boat and
thoroughly clean and dry
the area that is to be
repaired.
For small punctures less
than 1/8" apply a small
drop of glue and allow 24
hours to cure.
For immediate use allow 30
minutes to dry and then
inflate the compartment
only 3/4 full and if
necessary make a more
permanent repair later.
Patching
The most common
repairs are a puncture or
small cut. A penny size
patch is sufficient for
repairs of this type.
Trace the outline of a
penny on the patch
material and on the boat.
If a larger patch is needed,
use a larger item as a
template.
Cut patch along the outline
with scissors.
Pro Tip: Trace the outline
of the penny on masking
tape and cut with a utility
knife. Apply tape to the
boat instead of tracing on
the boat.
Apply glue to the patch
and boat. Allow to dry 15
minutes. Glue must be dry
to the touch. If glue layer
is thin, apply second coat,
allow to dry 15 minutes.
10