Forwardscan; Autopilot - Simrad GO XSE Quick Manuals

ForwardScan

•
Adjust depth, range and noise
rejection from the menu.
•
Start recording ForwardScan logs
from the menu.
•
Use the heading extension to
monitor ForwardScan on the chart
panel. Heading extension colors are
based on the ForwardScan alarm
values.

Autopilot

Activate the autopilot from any panel by selecting the autopilot option in the Control
bar, followed by selecting a mode in the Autopilot controller.
S
Standby
FU
Follow-Up
Non-Follow-
NFU
Up
A
Auto
N
NoDrift
D
N
Navigation
W
Wind *
|
8
GO XSE | Quick Guide - EN
Autopilot is passive. Used when manually steering at the
helm.
Manual steering using the rotary knob on a remote
autopilot controller to control the rudder angle.
Manual steering. The rudder movement is controlled by the
and
port starboard
another NFU unit.
Automatic steering, maintaining the set heading.
Automatic steering, keeping the vessel on a straight bearing
line by compensating for drift.
Automatic steering, navigating the vessel to a specific
waypoint or through a route using GPS data.
Automatic steering, maintaining the set wind angle.
buttons in the autopilot controller, or by