Setting Up/Folding Away The Berth - Mercedes-Benz Marco Polo 2017 Owner's Manual Supplement

Seat/berth combination, Marco Polo ACTIVITY / HORIZON
X
Release lever =.
The locking mechanism engages automati-
cally.
X
Pull the seat/berth combination and check
the locking mechanism.

Setting up/folding away the berth

G
WARNING
A vehicle occupant on the bed while the vehi-
cle is in motion cannot be restrained. There is
a risk of serious or even fatal injuries.
Only use the bed when the vehicle is station-
ary.
G
WARNING
If the sliding table is folded out during the
journey, it could be flung around. There is a
risk of injury.
Before starting the journey, move the sliding
table into the travel position and make sure
that it is engaged.
X
Make sure that nobody becomes trapped
when setting up or folding away the berth.
X
To set up: fold up the short section of the bed
Y
extension ( page 37).
X
Move the folding table forwards to the
mechanical stop (see the vehicle's Operating
Instructions).
X
Move the seat/berth combination forwards
to marking : on the front guide rail
Y
( page 33).
X
Remove the head restraints of the seat/berth
combination.
X
Rotate the head restraints by 180° and insert
them into the holders on the rear side of the
seat/berth combination.
X
Pull lever : up and adjust the seat backrest
to a horizontal position. When doing so, only
hold on to the seat backrest by the retainer
loop.
The seat cushion will lift up slightly.
X
Fold down the short section of the bed exten-
sion.
X
To fold away: perform the steps to set up the
berth in reverse order.
Removing and fitting the seat/berth
combination
Removing
The seat/berth combination is very heavy and
weighs approximately 75 kg. Always get at least
one person to help you.
X
Remove the stowage compartments
Y
( page 72).
X
Move the seat/berth combination forwards
allowing enough space for the bench seat/
berth to be tipped forwards (
35
Y
page 33).
Z