Mercedes-Benz Marco Polo 2017 Owner's Manual Supplement page 38

Seat/berth combination, Marco Polo ACTIVITY / HORIZON
36
X
Swing handle : up.
Make sure that nobody becomes trapped
when tipping the seat/berth combination.
The seat/berth combination is lifted at the
rear out of the guide rails and tips forwards.
X
Pull lever ; up on all 3 legs of the seat/berth
combination.
The seat/berth combination is released.
X
Tip the seat/berth combination forwards
slightly and lift it out of seat sliders =.
X
Tip the seat/berth combination forwards
slightly and lift it at the front out of the guide
rails.
Fitting
G
WARNING
If the seat/berth combination is not fully
engaged, it may be thrown about while the
vehicle is moving. There is a risk of an acci-
dent and injury.
Always ensure that the seat/berth combina-
tion is engaged as described.
Always keep the seat anchorages in the vehicle
floor free from dirt and foreign objects. This
ensures that the seat/berth combination
engages securely.
The seat/berth combination is very heavy and
weighs approximately 75 kg. Always get at least
one person to help you.
X
Remove the stowage compartments .
X
Tip the seat/berth combination forwards,
insert it into seat sliders = and allow it to
engage.
If a seat slider is moved during removal of
i
the bench seat/berth, the seat sliders of the
guide rails will no longer be parallel to one
another. The seat/berth combination can
then no longer be inserted and engaged.
Move the seat slider to the correct position
Y
first ( page 88).
X
Fold lever ; down on all 3 legs of the seat/
berth combination.
X
Tip the seat/berth combination backwards
and allow it to engage audibly.
Make sure that nobody becomes trapped
when tipping the seat/berth combination.
If indicator tabs ? have fully retracted into
the seat legs, the seat/berth combination is
locked in place.
X
If indicator tabs ? are not fully retracted,
press down handle : and check indicator