Identification Plate - Mercedes-Benz Marco Polo 2017 Owner's Manual Supplement

Identification plate

Identification plate
Vehicle type identification number
:
Equipment number
;
The vehicle identification plate listing the vehi-
cle type identification number and equipment
number is located on the C-pillar on the left next
to the sliding door.
Dimensions and weights
Dimensions
All data on dimensions are approximate values
and refer to the basic model. They may vary due
to the equipment levels and fixed accessories,
e.g. the roof rack, sports equipment holders,
cycle rack, etc.
Height with pop-up roof
closed
Front/rear height with
pop-up roof opened
Headroom with pop-up
roof closed
Headroom with pop-up
roof opened
Light height in pop-up
roof (at the foot)
Roof bed
Headroom at sink height.
11
1980 mm
2940/2120 mm
1330 mm
11
2350/2250 mm
270 mm
2050 x 1130 mm
Dimensions and weights
Marco Polo seat/berth
combination
ACTIVITY seat/berth
combination
Weights
The permissible gross weight and the permissi-
ble axle load depend on the equipment fitted.
They are specified in the vehicle's registration
documents and on the vehicle identification
plate (see the vehicle Operating Instructions).
Due to the different model versions, optional
equipment or accessories and attachments, the
unladen weight varies. The payload is thus
reduced by the corresponding value.
Permissible roof loads
G
WARNING
When a load is transported on the roof, the
vehicle's centre of gravity rises and the han-
dling changes. If you exceed the maximum
roof load, the handling as well as steering and
braking characteristics are severely affected.
There is a risk of an accident.
Always observe the maximum roof load and
adapt your driving style.
Maximum roof load
Pop-up roof
Mechanical 15 kg
Electrical 50 kg
(EASY-UP)
2030 x 1130 mm
1930 x 1350 mm
Open Closed
50 kg
50 kg
Z
89