Mercedes-Benz Marco Polo 2017 Owner's Manual Supplement page 32

Marco Polo seat/berth combination
30
Removing and fitting the seat/berth
combination
Removing
The seat/berth combination is very heavy and
weighs approximately 79 kg. Always get at least
one person to help you.
X
Remove the stowage compartment
Y
( page 72).
X
Remove the panel of the load compartment
enlargement .
X
Move the seat/berth combination forwards
allowing enough space for the bench seat/
berth to be tipped forwards (
X
Release the rotary catch of the plug and dis-
connect the plug of power cable ;.
The electrical connection of the seat/berth
combination is disconnected.
X
Swing handle : up.
Make sure that nobody becomes trapped
when tipping the seat/berth combination.
The seat/berth combination is lifted at the
rear out of the guide rails and tips forwards.
X
Pull up lever = on both sides of the seat/
berth combination.
The seat/berth combination is released.
X
Lift the seat/berth combination at the front
out of the guide rails.
X
Lift the seat/berth combination out of the
vehicle.
Fitting
G
If the seat/berth combination is not fully
engaged, it may be thrown about while the
vehicle is moving. There is a risk of an acci-
dent and injury.
Always ensure that the seat/berth combina-
tion is engaged as described.
!
into the vehicle, first set it down on a soft sur-
face/underlay. You could otherwise scratch
the floor. Only move the seat/berth combi-
nation in the guide rails.
Y
page 27).
Always keep the seat anchorages in the vehicle
floor free from dirt and foreign objects. This
ensures that the seat/berth combination
engages securely.
The seat/berth combination is very heavy and
weighs approximately 79 kg. Always get at least
one person to help you.
X
Remove the stowage compartment.
(
X
Remove the panel of the load compartment
enlargement .
X
Tip the seat/berth combination forwards and
insert it into the seat sliders and allow it to
engage.
i
the bench seat/berth, the seat sliders of the
WARNING
When lifting the seat/berth combination
Y
page 72)
If a seat slider is moved during removal of