Decode Search Mode; Output Sequence Overview - Baracoda BCM 2604 Programming Manual

Baracoda barcode reader

Hide thumbs Also See for BCM 2604:

Table of Contents

Centering On

Top of Centering Window

Left of Centering Window

2.9

Decode Search Mode

There are three selectable decode (scanning) modes:

Full Omnidirectional - Searches for bar code features beginning at the center of an image, and

searches to the image's limits. This mode reads all symbologies , in any orientation. The Full

Omnidirectional search is very thorough which may slow performance time.

Note: This search mode is the default setting

Quick Omnidirectional - This is an abbreviated search for bar code features around the center region

of an image. This mode quickly reads all symbologies in any orientation. The Quick Omnidirectional

mode may miss some off-center symbols, as well as larger Data Matrix and QR Code symbols.

Quick Omnidirectional

Advanced Linear Decoding - Performs quick horizontal linear scans in a center band of the image.

This mode is not omnidirectional, but does quickly read linear and stacked bar codes. Advanced

Linear Decoding cannot read 2D, OCR, or Postal symbols.

Advanced Linear Decoding

Require Output Sequence

When turned off, the bar code data will be output to the host as the Imager decodes it. When turned

on, all output data must conform to an edited sequence or the Imager will not transmit the output data

to the host device.

Note: This selection is unavailable when the Multiple Symbols Selection is turned on.

Output Sequence Editor

* Centering Off

Bottom of Centering Window

Right of Centering Window

Table of Contents