Tmaa10-04 Remote Ptt Kit And Tmaa10-05 Hands-Free Kit; Vox Operation (Tmaa10-05 Hands-Free Kit) - Tait TM8235 Service Manual

32 TMAA10-04 Remote PTT Kit and
TMAA10-05 Hands-Free Kit
remote PTT (TMAA10-04)
extension lead for
remote PTT
remote microphone
remote microphone
mounting options
32.1

VOX Operation (TMAA10-05 Hands-Free Kit)

Changing to VOX
Using a Function
Key
Changing to VOX by
using the Main
Menu
TM8100/TM8200 Service Manual
© Tait Electronics Limited June 2006
The TMAA10-04 remote PTT kit and the TMAA10-05
hands-free kit plug into the radio's auxiliary connector.
Both kits use the remote electret microphone to replace
communication through the usual rugged microphone.
The rugged microphone can still provide hookswitch
operation, if this is required.
auxiliary
connector plug
The TMAA10-04 kit uses a conveniently mounted remote
PTT key for PTT operation. When the remote PTT is
activated, the remote microphone is used for communication.
There are three mounting options for the remote microphone
and an extension lead is provided for the remote PTT in the
TMAA10-04 kit.
Your radio may able to detect the sound of your voice, so that you can make
calls without using the PTT key. Voice-operated transmit (VOX) is turned
on and off either by using a function key programmed for VOX or by
using the radio's Main menu.
The function key programmed for VOX toggles VOX between on and off.
When VOX is turned on, it remains on until the function key is pressed again.
While VOX is on, the VOX indication may be
programmed to appear below the channel infor-
mation on your display.
1. Select Menu>Radio Settings>
Function Settings>VOX.

TMAA10-04 Remote PTT Kit and TMAA10-05 Hands-Free Kit

Important These kits do not meet the IP54 pro-
tection standard. Care must be taken
when a radio with a TMAA10-04 or
TMAA10-05 kit installed is being
operated in an environment where
there is water, dust or other
environmental hazards.
561