17.3 Radio Programming For The Tmaa10-04 Remote Ptt Kit; 17.4 Radio Programming For The Tmaa10-05 Hands-Free Kit - Tait TM8200 Accessories Manual

Hide thumbs Also See for TM8200:
Table of Contents

Advertisement

17.3 Radio Programming for the TMAA10-04 Remote PTT Kit

Remote PTT
Settings in the PTT
Form
Remote PTT
Settings in the
Programmable I/O
Form
Table 17.2 Remote PTT settings in the Programmable I/O form, Digital tab
Pin
Direction
AUX_GPI1
Input
AUX_GPIO4 None

17.4 Radio Programming for the TMAA10-05 Hands-Free Kit

VOX Settings in the
PTT Form
TM8100/TM8200 Accessories Manual
© Tait Electronics Limited August 2005
The following table shows the settings required in the PTT form of the
programming application. Some of these settings are default settings and
may not need to be changed. Refer to the online help of the programming
application for more information.
Note
If hookswitch operation is programmed for the rugged micro-
phone and the Inhibit PTT Transmission When Mic On Hook
field is selected in the PTT tab of the PTT form, then the hands-
free remote PTT cannot transmit when the rugged microphone
hookswitch is closed (the microphone is on the microphone clip).
Table 17.1 Remote PTT settings in the PTT form, External PTT (1) tab
Field
Advanced EPTT1
The following table shows the settings required in the Programmable I/O
form of the programming application. Some of these settings are default
settings and may not need to be changed. Refer to the online help of the
programming application for more information.
Note
The Programmable I/O form setting for AUX_GPIO4 must have
the default programming settings and the AUX_GPIO4 pullup
resistor on the radio main PCB must be set for the factory default
of 3.3V (R769 fitted).
Label
Action
None
External PTT 1 Low
None
No Action
The following table shows the settings required in the PTT form of the
programming application. For detailed instructions on how to configure a
radio for VOX operation, refer to the section "Configuring VOX" in the
online help of the programming application.
TMAA10-04 Remote PTT Kit and TMAA10-05 Hands-Free Kit
PTT Transmission Type
Audio Source
Active
Debounce
25
None
None
Setting
Voice
AUX MIC
Signal State
Mirrored To
None
None
None
None
127

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm8100

Table of Contents