2.6
Operation in Transmit Mode
Overview
TM8100/TM8200 Service Manual
© Tait Electronics Limited June 2006
This section describes the functioning of the transceiver in transmit mode.
The operation of the transceiver is illustrated in
These block diagrams show the hardware modules integrated with the
software modules:
hardware (transmitter, receiver, CODEC and audio)
RISC processor (on FPGA of digital board)
custom logic (on FPGA of digital board)
DSP block (on digital board).
The transmit path consists of three major functional parts:
audio processing and signalling
frequency synthesizer
RF transmitter.
Figure 2.16 on page
51.
Description
55