Product Overview; Description Of Function Keys; Activate/Deactivate Easy Mode; Temperature Scale Selection In Easy Mode - Remotec ZTS-110 User Manual

Setup and Operations

Product Overview

Figure 6. ZTS-110
Event mode Inclusion indication
Day
MO WAKE
AM
Time
PROG ON
FAN ON
Program mode Fan mode Current temperature

Description of Function Keys

Symbol Key Description
Increase value / Toggle selection
Decrease value / Toggle selection
Select fan mode; also the Backward function key in some menus
Change operation mode; also the Forward function key in some
menus
Select program mode:
PROG ON, OVERRIDE and PERMANENT OVERRIDE;
also the Confirm function key in some menus
Back to Home
9

Activate/Deactivate Easy Mode

The ZTS-110 is default with Easy mode, below illustrates the functions of Easy
mode:
- Active functions:
- Inactive functions: Scheduling, Program Mode, Clock Display, Setting Time,
Battery low indication
User can use Easy mode to disable Schedule function and the schedule will be
controlled by Z-Wave gateway. User can still change temperature and mode by
1
pressing the local physical buttons.
HEAT
User can deactivate the Easy mode by local "Setting Mode" or Z-Wave
Configuration Parameter number 8. (Please refer to Z-Wave Configuration
parameters table).
Below is the example by local setting:
Step
Mode
1

Temperature Scale selection in Easy Mode

Step
1
Change Mode, change Fan mode and Temperature Scale
selection
Setting Swing, Setting, Differential Set-Point and Advanced
Recovery Mode
Procedure / Description
Press and hold "Mode" key for 2 seconds to
entry the setting mode.
It will display "EASY YES" if it stays in
Easy mode. Otherwise, it will display "EASY
no" if Easy mode is deactivated.
Press Up/Down key to toggle the selection.
Press "Prog" key to confirm your settings.
- it will go back to Home page if selected
"YES".
- it will go to Day setting if selected "no".
Procedure / Description
Press and hold "Prog" keys for 2 seconds to
entry temperature F (Fahrenheit) -> C
(Celsius) selection mode.
Press Up/Down key to toggle the
temperature F (Fahrenheit) -> C (Celsius)
selection.
Press "Prog" key to confirm it and back to
the Home page.
10
LCD indication
LCD indication