Table of Contents
Advertisement
Example for sensor temperature calibration:
reading temperature (77 F) + (-2 F)
o
o
Functions
Parameter No.
Sensor temperature
13 (0x0D)
-2 (0xFE) = -2 F (-1.0 C)
calibration
If using decimal input
Parameter no. = 13
Parameter value = -2
If using hexadecimal input
Parameter no. = 0D
Parameter value = FE ( Size >= 1 byte)
Display temperature = sensor reading value + offset value = 77 - 2 F = 75 F
33
Reset ZTS-110 to Factory Default Settings
Step
Parameter value range
o
o
1
o
o
2
Procedure / Description
Press and hold "Fan" + "Mode" keys for
2 seconds to entry the reset mode.
Press Up/Down key to toggle Yes/No
selection.
Press "Prog" key once to confirm the action.
=> It will perform the reset if select "Yes" or
=> It will back to home page if select "No".
LCD display done after reset to factory
default settings.
The following data will be reset to default:
1. Clock : 12:00am
2. Day: Mon
3. Temperature scale: F
4. Swing : 2F
5. Diff: 2F
6. Pre-defined schedule
7. Operation mode: OFF
8. Default Heat override set point
9. Default Cool override set point
10.Filter counter cleared
11.Delete from network
12. All configuration parameters value
34
LCD indication
Advertisement
Table of Contents
