Page 1
User Manual AIR HOG Model: 7303LX Vacuum Booster REV. 3/20/18 13655 Stowe Dr. Poway, CA 92064 • P: (858) 679-1191 • F: (858) 726-6005...
Page 2
If there are questions regarding maintenance, replacement, or ordering parts please contact an authorized Mytee Products Service Center. To see an updated list please visit our website at http://www.mytee.com/support/service-centers. Before using your Mytee product, please read this manual thoroughly.
TABLE OF CONTENTS IMPORTANT SAFETY INFORMATION AT A GLANCE 1.1 - Technical Specifications 1.2 - Included with the Air Hog™ 1.3 - Air Hog™ Front View 1.4 - Air Hog™ Rear View 1.5 - Switch Plate MACHINE OPERATION 2.1 - Powering the Air Hog™ 2.2 - Connecting Hoses 2.3 - Air Hog™...
When and if calling Mytee for support, please have your grounding plug. The plug must be plugged into an appro- Model and Serial Number available for faster assistance.
Page 5
IMPORTANT SAFETY INFORMATION This product is intended for commercial use only. To reduce the risk of fire, electrical shock, or injury: 1. Read all instructions before using equipment. 2. Use only as described in this manual. Use only manu- facturer’s recommended attachments. 3.
1 - AT A GLANCE 1.3 - Air Hog™ Front View 1. 4 Gallon Recovery Tank 4. 2” Front Casters 2. 2” Male Cuff-Lynx™ Starter 5. 6” Rear Wheels 3. Pump-Out Hose Fitting 6. See-Thru Recovery Tank Lid...
2 - MACHINE OPERATION 2.1 - Powering the Air Hog™ 2.3 - Air Hog™ Booster Configurations The Air Hog™ can be set up as a booster in multiple configurations on its own or daisy-chained with other Air Hogs™. See page 11 for more details. ♦...
2 - MACHINE OPERATION 2.6 - Setting Up the Air Hog™ as a Booster Using One Booster If pump-out is to be used. Always cap unused exhaust port. If pump-out will be used, connect vacuum hose from extractor to top exhaust port and cap bottom one. If not, connect hose to bottom exhaust port and cap top one.
2 - MACHINE OPERATION 2.7 - Setting Up the Air Hog™ as a Stand-Alone Extractor Both exhaust ports plugged. The Air Hog™ does not have a solution tank or solution pump. However, it can be used to extract pre-sprayed solution from carpet.
3.2 - Ball Float Maintenance In order to keep the Air Hog™ running smoothly and reduce the risk of damage to the machine and subsequent downtime, Mytee recommends following the maintenance The ball float prevents recovered dirty water from rising schedule below: too high and damaging the vacuum motors.
5.1 - Vacuum Troubleshooting Vacuum blows water out the exhaust. Possible Causes Solutions Vacuum is not turning on. Foam building up in the Use Mytee’s Auto Possible Cause Solution recovery tank. Defoamer Kit (Part # A688). Vacuum may not be getting...