Toyota land cruiser 79 series 1984 - current (16 pages)
Summary of Contents for ClearView Easy Slide
Page 1
INSTALLATION & USER GUIDE 3 Frog Court, Craigieburn VIC 3064 (03) 8351 9933 info@clearviewaccessories.com.au www.clearviewmirrors.com.au Page | 1 Due to Clearview Continuous Improvement Program, information may change without notice. Clearview takes no responsibility for the result of incorrect use of these installation instructions.
Page 2
The Clearview Easy Slide should only be mounted to a solid, fixed, flat timber/metal surface. Do not attempt to fit the Easy Slide to an existing inbuilt fridge slide, warranty on the Easy Slide will be made void if attempted.
Page 3
Easy Slide handle assembly IMPORTANT The Easy Slide must be bolted to a drawer top or partially secured to a workbench via clamps at the rear to enable safe lowering of the fridge tray during handle assembly. Do not attempt to lower the fridge tray prior to securing the Easy Slide, as components are under pre-load pressure from gas struts and a considerable downward force on the handle will be required.
Page 4
Page | 4 Due to Clearview Continuous Improvement Program, information may change without notice. Clearview takes no responsibility for the result of incorrect use of these installation instructions.
Page 5
To secure fridge, hold the strap by the buckle above the Easy Slide and feed the loose end of the strap down through the fridge handle/tie down point and through the Easy Slide strap provision from inside to out.
Page 6
WARNING Due to the nature of the scissor arm mechanism, the Easy Slide has some pinch points to be aware of. Do not place hands, fingers or objects in the areas shown below, as they are pinch hazards. Always use the handle to lower, raise, open and close the Easy Slide.
Need help?
Do you have a question about the Easy Slide and is the answer not in the manual?
Questions and answers