Cpe400 Efa - Led, Display, And Push Buttons - GE Mini Field Agent User Manual

3.2.2 CPE400 EFA – LED, Display, and Push Buttons
The CPE400 Hardware only contains one LED and a four-line display (manipulated by two push buttons)
that affect/reflect information about the EFA. The description of the Display contents below only covers
items related to the Field Agent.
Field Agent Status Indicators (LEDs)
LED
FAOK
Display Navigation Push Buttons
FA Settings Display Menu
Menu Item Description
EFA Status Shows the current state of the Field Agent, as follows:
Network Config Shows network interface information for the Field Agent, including IP Address, Subnet Mask, Gateway,
MAC Address, and IPv6 Address.
These settings are changed as described in the section,
Commands Sub Menu
Config Mode Enter Configuration Mode, enabling access to the Web Console for one hour.
FA Reboot This will restart the Field Agent operating system and Predix machine without affecting the controller.
Factory Reset
This will reset the IP Address back to the default, and remove Predix Enrollment information from the
Field Agent. On the first boot following a factory reset, Predix Machine will generate cryptographic keys
used for communication.
It is Critical the Field Agent is not powered down during these operations to prevent corruption that may
require another factory reset to resolve. Please wait until the EFA Status is Not Connected (FAOK LED
blinking at 1Hz) before cycling power.
For public disclosure
LED State
On Green
Blinking Green Blink at 0.5 Hz: Field Agent Starting.
Off
Push Button Function
Moves the cursor to the next item in the display, including moving to
DISP the next page if more than one page exists for a given level in the
display hierarchy.
Executes the currently selected item in the display. This could cause
the display to navigate to another location in the hierarchy, or it could
SEL cause a command to be executed if a command is currently selected.
Before a command is executed, the user is given the choice to select
OK or Cancel.
•
Off: The Field Agent is Off.
•
Starting: The Field Agent is starting.
•
Not Connected: The Field Agent is Running, but not connected to the cloud.
•
Cloud Connected: The Field Agent is Running and connected to the cloud.
Operating State
Field Agent Running and Connected to Cloud.
Blink at 1 Hz: Field Agent Running.
Field Agent Off.
Configure the Network.
GFK-2993F 35