Pin Definitions; Network Configuration - GE Mini Field Agent User Manual

2.1.1.5

Pin Definitions

Note Refer to the section
Connector Function
Power connector
PWR
(9 to 30 V dc)
Normally Open relay contact output, 30 V dc, 1 A resistive load
IO
+24 V Opto-coupled Input, 10 mA
CAN bus Serial
RS-485 Serial
RS-232 Serial
2.1.1.6

Network Configuration

Note Refer to the section
Ethernet interfaces.
The default WAN and LAN IP addresses of the Mini Field Agent are displayed in the following table.
Item
IP Address
Subnet Mask
Gateway
WAN connects to the uppermost RJ-45 connector. LAN connects to the three lower RJ-45 connectors and they are switched
internally.
For public disclosure
MFA Interface Details for a figure that displays the physical locations of each pin.
for a figure that displays the physical locations of the LAN and WAN
MFA Interface Details
WAN
Obtain using DHCP
Obtain using DHCP
Obtain using DHCP
Description
Pin Number
1 Ground
Negative Voltage
2
Positive Voltage
3
1 K1-A
2 K1-B
3 IN+
4 IN-
CAN_H
1
CAN_L
2
3 Ground
4 A /RX
5 B /CTS
6 Y /TX
7 Z /RTS
1 TX
2 RX
3 GND
4 RTS
5 CTS
LAN
192.168.1.100
255.255.255.0
Not set
GFK-2993F 22