Installation The Firewall In A Rack - H3C SecPath F1000-E Installation Manual

Installation Manual
H3C SecPath F1000-E Firewall
There is a minimum clearance of 10 cm (3.9 in.) around the firewall for heat
dissipation of the firewall chassis.
No heavy object is placed on the firewall for fear of device damage and poor heat
dissipation.

4.3.2 Installation the Firewall in a Rack

I. Installing an N68 rack
The F1000-E can be installed in an H3C N68 rack. For the installation of an N68 rack,
refer to N68 Cabinet Installation Guide.
II. Installing rack-mounting brackets onto the firewall
1) Structure of the rack-mounting brackets
(1)
(1) Left front rack-mounting bracket
(3) Left rear rack-mounting bracket
Figure 4-3 Structure of rack-mounting brackets
2) Install the rack-mounting brackets to the firewall
Before installing the firewall in the rack, fix the left and right front rack-mounting
brackets respectively to the left and right sides of the front panel of the firewall. Figure
4-4 shows how to install the rack-mounting brackets.
Figure 4-4 Install the front rack-mounting brackets to the firewall
(2) (3)
4-3
Chapter 4 Installing the Firewall
(4)
(2) Right front rack-mounting bracket
(4) Right rear rack-mounting bracket