Display Accumulator - Rice Lake 520 Installation Manual

9.0

Display Accumulator

The accumulator must be enabled before use in either normal mode or setpoint operations. Once enabled, weight
(net weight if a tare is in the system) is accumulated whenever a print operation is performed using the
key, digital input, or serial command. The scale must return to zero (net zero if a tare is in the system) before the
next accumulation.
1. Press and hold the
The displayed value is total net weight.
2. Press the UP key to clear the accumulator or the
3. The display will prompt for verification before a clear function with the message
CONFIRM . Pressing the
clear function.
NOTE: The PRINT key only performs one accumulation. Weight must return to zero before another accumulation
is allowed.
G/N key for three seconds to display the accumulated value if accumulator is enabled.
ZERO/UP key clears the accumulator value. Pressing
PRINT key to print the accumulator.
PRINT
CLEAR ALL? ZERO TO
TARE/ENTER aborts the
Display Accumulator 45