Media Utilities; Formating A Usb Memory Stick - Viavi T-BERD 4000 Base Unit User Manual

Media utilities

Formating a USB
memory stick
Fig. 30 License imported
At the end of this sequence you will be asked to reboot the unit to
apply the modifications, pushing the key
to restart the Platform.
To get access to the menu, click on
In order to format a USB memory stick, select Media utilities, then
Usbflash Format. Confirm your choice to actually format the USB
memory stick.
As for any media formatting, please note that all data present on
the USB memory stick will be irremediably lost.
USB memory sticks can be very different.
They differ on Hw and Sw aspects, even inside a given brand.
In particular, USB memory sticks targeting audio recording are often
formatted in very specific ways and the format is often very different
from a standard FAT.
For all these reasons, we advise users to use memory sticks provided
by Viavi.
In any case, USB memory sticks which are recognized by the 4000
Platform (a beep is generated when plugged on the 4000 Platform)
but which cannot be read or written, should be formatted on the
4000 Platform with the Usbflash Format utility in Expert tools >
Media utilities.
If a problem occurs with the USB stick you are using, contact your
Local Technical Assistance Center.
User Manual 77000000206 Rev. 007
Chapter 4 System set-up
. Confirm the reboot
Expert tools then on
Expert Tools
Media utilities.
61