Chapter 6 Applications
eMail Application
104
POP3 and IMAP4 Protocols
–
Server for receiving: enter the server address for the received
messages.
–
SMTP server (send): enter the server address for the sent
messages.
–
User ID: enter the user idenfier for accessing to the server
–
Password: enter the password for accessing to the server
News (NNTP) Protocol
–
News Server: enter the server address for the received messages
–
SMTP server (send): enter the server address for the sent
messages.
–
This server requires authentication: if the server needs authetica-
tion, select this parameter to activate if necessary the following one,
and to enter a user identifer and password.
–
Authenticate on connect: this parameter can be activate exclu-
sively when the following one is selected.
–
User ID: enter the user idenfier for accessing to the server
–
Password: enter the password for accessing to the server
Local Mbox File Protocol
–
Local Mailbox: Enter the name of your local mail box
–
SMTP server (send): enter the server address for messages sent.
–
Use mail command rather than SMTP server: select this param-
eter deactivate the previous one and activate the following.
–
command to send mails
None (SMTP only) Protocol
–
SMTP server (send): use this protocol in order to exclusively send
mails and not to receive them.
Once the Basic Page is completed, click on
account.
4
In the page index, click on Receive and define the parameters for
the received messages.
User Manual
77000000206 Rev. 007
A
to validate this new
PPLY