Table of Contents
Advertisement
Chapter 11 File management
File menu
170
S
a
Press the
YSTEM
b
Successively select
Format
c
Confirm your choice to format the USB memory stick
d
Once formatted, disconnect the USB memory stick using the Eject
USB key and reconnect it.
As for any media formatting, please note that all data present on
the USB memory stick will be irremediably lost.
When a file is moved in the explorer of the 4000 Platform, the end
of the move on the screen does not mean that writing of data into
the memory is complete. Some data may still be in a writing
process if the storage unit is removed prematurely.
USB memory stick disconnection
Before disconnecting the USB memory stick, always select a storage
device different from usbflash (select disk for example) in the explorer.
Make sure you no longer have any running applications using the
usbflash storage media.
The user must push the
Explorer or Link Manager, but also in Expert Tools > Media Utilities.
The icon becomes
the USB stick cannot be used anymore
The USB memory stick can then be disconnected from the 4000 Plat-
form's USB port.
NOTE
If the 4000 Platform operates on battery and is switched off before the
USB memory stick is properly disconnected, all the applications using
the usbflash storage media will be automatically turned off and the
USB memory stick can be disconnected afterwards without any prob-
lem.
User Manual
77000000206 Rev. 007
button
Expert Tools
Media Utilities
>
E
USB
key, which is available in File >
JECT
to indicate it can be removed safely. In this state,
Usbflash
>
Advertisement
Table of Contents
Troubleshooting
