Table of Contents
Advertisement
1
Enter text using an external keyboard which is connected to the
Product Name/Family Brand via the USB port or using an external
keyboard of a PC connected to the Platform.
2
Enter text using the keyboard of the Application
a
Select Keyboard on the key
A keyboard is displayed on the lower part of the screen
Fig. 37
Keyboard of the Text Editor
b
Use the arrow keys or the touchscreen to enter the text.
3
Enter manually the text when a touch screen is used.
a
Select Writing on the key
b
Write the letter manually, using the stylus for touch screen
You can click on Train, in order to draw each character on its cell.
This allow to store the characters with your writing characteristics, in
order to get the good letters when writing with the stylus.
4
Enter text using the numeric keypad onto the Platform. To enter a
character, push as many times as necessary on the corresponding
button. The characters available for a button are displayed on the
lower left part of the screen (see
form" on page
27).
Example: to enter the letter «b» push the key «2» twice
5
Press simultaneously
character wished and press simultaneously on
validate and enter the character in the text zone.
Specific keys and shortcuts:
Key «1»
–
Press key «1» to enter specific characters:
User Manual
77000000206 Rev. 007
Navigation and text edition in the Application pages
"Numeric keypad on the 4000 Plat-
S
+
to position the cursor on the
HIFT
Chapter 6 Applications
S
+ E
to
HIFT
NTER
79
Advertisement
Table of Contents
Troubleshooting
