Table of Contents
Advertisement
–
Select SMTP Authentication (SMTP AUTH) if you wish to add an
authentication to the mail access.
Once selected, you can choose the authentication method to be
used: Automatic / PLAIN / LOGIN / CRAM-MD5
You can also enter a User ID and Password for authentification
when sending messages.
NOTE
If those two fields are empty, the same user ID and password as the
Receive parameters will be used.
Select Authentication with POP3 before sending if the message must
be authenticated by a POP3 server before sending.
Click on Apply to validate the Send parameters.
6
On the Page index, click on Compose and define the parameters
for the composition of the messages.
Fig. 71
Mail Account - Compose parameters
In the Signature zone:
–
Insert signature automatically: select this parameter in order to
insert a signature at the end of all the messages sent.
–
Signature separator: modify, if necessary, the signature separator
(-- by default)
–
Select if the signature is available in a file or with a command output.
–
In the Automatically set the following addresses zone, enter the
addresses of the contact(s) to which a copy or a reply will be sent for
all messages.
Click on Apply to validate the Compose parameters.
User Manual
77000000206 Rev. 007
Chapter 6 Applications
eMail Application
107
Advertisement
Table of Contents
Troubleshooting
