NOTE
To return to a Live Camera image, press the Live key or press the
Full Screen/Mosaic key to view both the live image and a test result
simultaneously.
In Mosaic mode, the result of the test only displays Pass or Fail infor-
mation; the status of each zone is displayed in full screen mode.
Position 1 :
L
IVE CAMERA
Selected picture
Position 2:
File saved on disk
Fig. 105
–
You may select one of the pictures by clicking on it.
The selected picture is framed in green.
The toolbar on the right varies according to which picture is selected
(camera, or static scope picture):
Selected picture: Live
Test
Freeze
If all positions were taken, the picture that was once at the fourth posi-
tion is unloaded from memory. Frozen pictures and snapshots are
lost, unless they were saved on the internal memory.
Brightness/Contrast & Auto Contrast keys
User Manual
New features available with the P5000 and P5000i Scope
Test result in mosaic mode (with a P5000i scope)
Allows to launch a (new) test of the connector
(see
"Launching a test of the connector and fiber
end-face" on page
Allows to freeze the live image and to save it later
on the disk. Once this key is pressed, the freeze
image is automatically set on Position 2.
77000000206 Rev. 007
Chapter 10 Scope
161)
163