Launching The Upgrade - Viavi T-BERD 4000 Base Unit User Manual

9
10 Insert the memory stick into one of the USB ports on the Platform.
NOTE
A bip is emitted each time the USB memory stick is inserted or
removed from the 4000 Platform.
11 Press the
12 Click on Confirm.
Launching the
Whatever is the method selected for upgrade (Server, USB key...) and
once the list of the software versions available is displayed next to the
upgrade
versions installed on the 4000 Platform (see
follow these instructions to launch the upgrade:
1
2
NOTE
The software versions list does not always appear (cf previous ver-
sions) as well as the
firm/Continue
During the upgrade, the Testing indicator is lit in red. Do not
push any button or remove the USB memory stick while the
indicator is lit. The USB stick can be removed if necessary once
the Testing indicator is off.
User Manual
Then remove the USB memory stick, using the appropriate proce-
dure, from your PC
H
button, then successively the buttons
OME
> Upgrades > Software Upgrade > Upgrade from
The message Are you sure? is displayed
The list of the software versions available on the USB stick is
displayed next to the versions installed on the 4000 Platform.
Click on Show Prev choice
previous and next versions available.
Click on Confirm this Choice
software(s).
or
Click on Confirm All Choices to upgrade all versions.
Previous / Next Choice
key. In this case, the upgrading starts automatically.
Upgrading begins. The 4000 Platform is automatically rebooted.
Upgrading takes several minutes.. Finally, the 4000 Platform is auto-
matically restarted.
77000000206 Rev. 007
Chapter 13 Maintenance and Troubleshooting
Installing a new version of the software
Figure 132 on page
or Show Next Choice
to start the upgrade of the selected
Expert tools
USB.
202),
to display the
buttons and the Con-
205