Chapter 4 System set-up
Configuring the unit
Files (Formatted)
56
Choosing in the Printer menu, the option
print the open file of the 4000 Platform in the JPG, PNG or PDF format,
exactly as if the file was printed on paper. Therefore, if the file (trace or
other) is too large for one A4 page, several JPG, PNG or PDF files will be
created.
Printing a trace to the JPG/PNG/PDF format
1
Select the
Files (Formatted)
2
Select the File Format: JPG / PNG / PNG on the second line.
3
Select the logo to be displayed on the upper right of the page:
a
Select the line Logo
b
Press the right direction key to open the Edition keypad
c
Enter the full path and name of the file containing the logo
Example: disk/Logo.jpg (media/file name)
d
Press Enter to validate
The logo will be displayed on the upper right part of the file.
4
Open the trace to be printed in the JPG format
5
If necessary, make the modifications on the trace (see user manual
of the 4100 OTDR Modules).
6
Set the trace view as wished:
–
if the function is set to the Trace mode (Trace is selected on the
menu key Trace/Table/Summary), the JPG/PNG/PDF file will
countain the header and the trace (in one page).
–
If the function is set to Table mode (Table is selected on the
menu key Trace/Table/Summary), the JPG/PNG/PDF file will
countain the header, the trace and the entire results table
(several pages may be required)
–
If the function is set to Summary mode (Summary is selected
on the menu key Trace/Table/Summary), the JPG/PNG/PDF
file will countain the header and the summary page. This view is
only available with OTDR traces.
NOTE
If several traces are displayed in overlay, the JPG/PNG/PDF file will
print exclusively the data for the active trace.
7
Launch printing by pushing simultaneously the left and right direc-
tion keys
The icon
is displayed until the saving process is finished
User Manual
77000000206 Rev. 007
Files
(Formatted), you can
function