Buffalo TeraStation User Manual page 70

9 Select conditions for emails to be sent.
• HDD Status Report
• Fan Failure
• Disk Error
• Backup Complete
• Quota Report
• System Alert
10 If you have selected HDD Status Report for sending condition, select time to send.
11 Click Save.
4
Notes:
The following examples show notification emails for each selection:
• The content of the mail which include the periodical report when HDD Status Report is selected
TeraStation Status Report: Periodical Report: Information
TeraStation Information
TeraStation Name: TS-xxxxx
Time Stamp: 2009/03/23 00:00:01
IP Address: 172.16.37.62
Configuration Scree: http://172.16.37.62/
Continuous operating time: 13:51:57
• The content of mail which is sent periodically when Disk Error is selected
TeraStation Status Report: DISK Error Notification: Failure: Fail to mount a disk
DISK Error Notification
The error occurred on HDD.
The erroneous disk drive: Disk 1
Disk could not be mounted.
• The content of mail which is sent periodically when Fan Failure is selected
TeraStation Status Report: FAN Error Notification: Failure: FAN stopped.
FAN Error Notification
The FAN has stopped.
The internal temperature is now over the threshold. Shut down the system.
System temperature: 52 [°C]
TeraStation User Manual
Sends the condition of the hard drives at the specified time.
Sends when the fan error is recognized.
Sends when an hard drive error is recognized
Sends when the backup is complete.
Sends when the Quota Space Limitation is exceeded at the time which is specified
on HDD Status Report.
Sends when system is rebooted or shut down, or RAID configuration is changed.
Click Send Test Message to send a test message.
69