Buffalo TeraStation User Manual page 37

3
4
5
6
Notes:
• You can register up to the second level of subfolders. However, folders with more than 80 bytes (UTF-8) in their names
cannot be selected.
• Before they can be selected as backup target folders, folders on other TeraStations must be configured as backup
destinations.
• Hard drives formatted with FAT32 or FAT16 may come with some limitations if connected to the TeraStation. The
following limitations may apply. For best results, use XFS or EXT3 formatted drives instead.
- Files larger than 2 GB cannot be backed up to a FAT16 drive, and files larger than 4 GB cannot be backed up to a
FAT32 drive. Errors will occur and the backup operation may stop before finishing.
- If the data being backed up contains files from Mac OS such as ".DS_Store", the file names may include characters
that cannot be written to FAT16 or FAT32 drives. This will cause errors and the backup operation may stop before
finishing.
• Note the following if using Auto Power Mode* during backups.
- If the TeraStation is in standby mode, it will power on automatically 15 minutes before a backup starts.
- If the TeraStation is switched to standby mode immediately before a scheduled backup, the backup may not be
performed.
- Refer to page 12 for more information on Auto Power Mode.
TeraStation User Manual
Click Backup Folders - Add.
1 Select Backup Sources and Backup Targets folders.
2 Click Add.
Click Apply.
The backup job is added to the list of backup jobs.
36