Download Print this page
Axxess XSVI-1731-NAV Installation Instructions

Axxess XSVI-1731-NAV Installation Instructions

Data interface for honda

Advertisement

Quick Links

Honda Data Interface
2016-up*
INTERFACE FEATURES
• Provides NAV outputs (parking brake, reverse, and speed sense)
• Pre-wired ASWC-1 harness included (ASWC-1 sold separately)
• Retains the factory backup camera
• Retains balance and fade
• Includes the AX-CAM6V 12-volt to 6-volt converter
• Micro "B" USB updatable
INTERFACE COMPONENTS
• XSVI-1731-NAV interface
• XSVI-1731-NAV harness
• AX-CAM6V 12-volt to 6-volt converter
APPLICATIONS
HONDA
Civic LX
2016-up
XSVI-1731-NAV
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Connections to be made .......................................2
Installing the XSVI-1731-NAV .................................3
Initializing the XSVI-1731-NAV ...............................3
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.

Advertisement

loading
Need help?

Need help?

Do you have a question about the XSVI-1731-NAV and is the answer not in the manual?

Questions and answers

Summary of Contents for Axxess XSVI-1731-NAV

  • Page 1 Honda Data Interface 2016-up* TABLE OF CONTENTS Connections to be made ........2 Installing the XSVI-1731-NAV .........3 Initializing the XSVI-1731-NAV .......3 INTERFACE FEATURES • Provides NAV outputs (parking brake, reverse, and speed sense) • Pre-wired ASWC-1 harness included (ASWC-1 sold separately) •...
  • Page 2 CONNECTIONS TO BE MADE The following (3) wires are only for multimedia/navigation radios that require these wires. From the XSVI-1731-NAV harness to the aftermarket radio: • Connect the Blue/Pink wire to the VSS/speed sense wire. • Connect the Black wire to chassis ground, and also to the Black wire of the AX-CAM6V.
  • Page 3 Also, if installing an ASWC-1 connect it after you initialize and test the interface/ • Connect the XSVI-1731-NAV harness into the interface, and then to the harness in the vehicle. radio, with the key in the off position.