Advertisement
USB INTERFACE
XIA-USB
INST ALLA TION INSTRUCTIONS
The Axxess XIA-USB is a digital interface designed to play the audio from the USB mem-
ory stick while being used in two separate scenarios; 1) in conjunction with an OEM radio
and the Axxess XIA-HUB line of digital interfaces or 2) by itself in conjunction with any
radio that has an auxiliary audio input jack.
When using the XIA-USB with an OEM radio and the Axxess XIA-HUB digital interfaces, the
OEM radio controls the USB stick. If the OEM radio is Satellite ready then the information
on the USB stick (title, artist, etc...) will be displayed on the radios screen. If the OEM radio
is not Satellite ready then the optional Axxess XIA-LCD display is required.
When using the XIA-USB by its self with any radio with an auxiliary audio input jack the
optional XIA-LCD will be required to control the USB stick and display the information on
the USB stick (title, artist, etc...).
Note: Not intended for use with an iPod
* READ IMPORTANT WARNING INSIDE
BEFORE ATTEMPTING ANY INSTALLATION
INTERFACE COMPONENTS
• XIA-USB
• 5' USB extension cable
• DIN connector to rca's and power leads
• DIN to DIN Cable
OPTIONAL COMPONENTS
• XIA-LCD
1-800-221-0932
© COPYRIGHT 2009 METRA ELECTRONICS CORPORATION REV. 05-12-09
<Line 1>
ENT
<Line 2>
ESC
iPOD Digital Interface
iPOD Digital Interface
ACCESS
ACCESS
REMOTE LCD DISPLAY
REMOTE LCD DISPLAY
www.axxessinterface.com
Advertisement
Table of Contents
Related Manuals for Axxess XIA-USB
Summary of Contents for Axxess XIA-USB
- Page 1 Satellite ready then the optional Axxess XIA-LCD display is required. When using the XIA-USB by its self with any radio with an auxiliary audio input jack the optional XIA-LCD will be required to control the USB stick and display the information on the USB stick (title, artist, etc…).
- Page 2 XIA-USB * READ IMPORTANT WARNING BEFORE ATTEMPTING ANY INSTALLATION * IMPORTANT WARNING THIS PRODUCT INCLUDES INSTRUCTIONS FOR INSTALLATION WHICH MUST BE CAREFULLY FOLLOWED. THE INSTRUCTIONS ARE WORDED IN SUCH A MANNER TO ASSUME THAT THE INSTALLER IS CAPABLE OF COMPLETING THESE TYPE OF ELECTRONIC INSTALLATIONS.
- Page 3 2. Using the 8 pin DIN to 8 pin DIN cable supplied with the XIA-USB, connect one end to the center port of the XIA-HUB interface. (Figure A) 3. Connect the other end of the 8 pin DIN to 8 pin DIN cable to the 8 pin port of the XIA-USB (Figure A) Continued on page 2.
- Page 4 6. Find a suitable mounting location for the XIA-LCD on the dash, somewhere that is visible to the driver and within reach. 7. Plug the end of the XIA-LCD into the 4 pin port on the XIA-HUB interface, not in the XIA-USB. (Figure A) 8. Plug the 20 way Molex harness back into the XIA-HUB interface. (Figure A) 9.
- Page 5 XIA-USB 3. Plug the rca’s from the XIA-USB into the aftermarket radio’s AUX in. If the radio does not have an AUX in the use of an fm modulator like the Axxess AFM-MOD will be required. 4. Connect the Red wire of the XIA-USB to a 12 volt switched accessory wire. (Figure B) 5.
- Page 6 XIA-USB NOTES...
- Page 7 XIA-USB NOTES...
- Page 8 XIA-USB INSTRUCTIONS www.axxessinterface.com 1-800-221-0932 REV. 05/12/09 © COPYRIGHT 2008-2009 METRA ELECTRONICS CORPORATION INSTXIA-USB...
Need help?
Do you have a question about the XIA-USB and is the answer not in the manual?
Questions and answers