Other Functions
Delay Start
This lets you add ingredients now, but start
cooking later. Delay Start will not work with
Yogurt, Pasta/Boil, Hot Pot, Sauté/Brown,
Reheat, or Manual modes. Do not use with
foamy or thick foods (such as oatmeal).
1.
Follow directions for the desired
cooking program.
2.
After you select the cooking program,
press Delay Start and use + or – to
select a start time.
3.
Press On/Start. The display will show
the programmed time, and the timer
will count down. Once the countdown
has finished, the cooker will start your
selected cooking program.
Keep Warm
This keeps your food warm after cooking
is complete. Do not cook raw foods using
Keep Warm.
Press Keep Warm, then press Cook
1.
Time, and use the + or – buttons to
change the time. Optionally, press
Pressure/Temp, and use the + or –
buttons to change the temperature.
Press On/Start. The display will show
2.
the programmed time, and the timer
will count down. Once the countdown
has finished, the cooker will go into
standby.
NOTE: Your cooker will automatically switch to
Keep Warm when cooking is finished, unless you
are using Pasta/Boil, Yogurt, or Hot Pot. The default
time is 6 hours.
Changing Temperature Units
The default temperature units for the cooker
are Fahrenheit (F), but can be switched to
Celsius (C). If desired, follow the steps below
to switch to Celsius.
1.
While the cooker is on standby
"), press + and – at the same
("
time.
2.
The display will show "C", and the
temperature units will now be Celsius.
3.
To switch back to Fahrenheit, press
+ and – again.
Cancelling Programs
Press Stop/Cancel at any time to cancel the
active cooking program. The display will
show "
". After 3 minutes of inactivity,
the cooker will beep once and go into
standby.
17
Need help?
Do you have a question about the CP016-PC and is the answer not in the manual?