Omnidirectional Mounting Procedure; Figure 3-17: Directional Antenna Mounting - Honeywell SmartLine User Manual

Omnidirectional mounting procedure

Step
1
Secure mast mounting bracket to mast as shown using 2 U-bolts and supplied hardware.
2
Remove antenna mounting bolt and washer from antenna base.
3
Insert antenna into mounting bracket and secure with washer and antenna mounting bolt. Do
not overtighten.
4
Any drain holes in the antenna base must be kept clear for proper operation.
Revision 2

Figure 3-17: Directional antenna mounting

SmartLine Wireles User's Manual
Action
3. Installation
3.12. Remote antenna
35