Figure 6-2: Security And Node Deployment - Honeywell SmartLine User Manual

To connect your transmitter to the OneWireless network perform the following steps.
Step
1
If the Provisioning Device contains no keys, obtain new security keys from
the WDM Provisioning tab
2
When the Provisioning Device has valid unexpired keys, aim it at the
transmitter and transmit a key to the transmitter. The transmitter will validate
the key and then use it to make a connection to the OneWireless network.
The Transmitter may continue to show the diagnostic message "NO KEY" for
a brief time while it validates the key before showing the "DISCOVER"
message.
To verify your transmitter has been provisioned, see the Connection prompt
on the Read Device Information screen
Revision 2

Figure 6-2: Security and Node Deployment

Action
Figure 6-3
SmartLine Wireles User's Manual
6. Operation
6.4. Provisioning Device menus
61