Honeywell SmartLine User Manual page 4

This document describes preparation, operation and maintenance of the SmartLine
Transmitters. Mounting, installation and wiring are covered in other documents.
Honeywell does not recommend using devices for critical control where there is a single point of failure
or where single points of failure result in unsafe conditions. OneWireless is targeted at open loop
control, supervisory control, and controls that do not have environmental or safety consequences. As
with any process control solution, the end-user must weigh the risks and benefits to determine if the
products used are the right match for the application based on security, safety, and performance.
Additionally, it is up to the end-user to ensure that the control strategy sheds to a safe operating condition
if any crucial segment of the control solution fails.
Revision Information
Document Name
SmartLine Wireless User's Manual
st
1 Release
RoHS added
References
The following list identifies all documents that may be sources of reference for material discussed in this
publication.
Document Title
STDW800 Wireless Specification, Differential Transmitter
STAW800 Wireless Specification, Absolute Transmitter
STGW800 Wireless Specification, Gauge Transmitter
STFW700_800 Wireless Specification, Flanged Transmitter
STRW700_800 Wireless Specification, Remote Seal Transmitter
STDW700 Wireless Specification, Differential Transmitter
STAW700 Wireless Specification, Absolute Transmitter
STGW700 Wireless Specification, Gauge Transmitter
OneWireless R310 Release Notes
OneWireless R310 Migration Users Guide
OneWireless R310 Field Device Access Point Users Guide
OneWireless R310 Wireless Device Manager Users Guide
OneWireless R300 Experion PKS Integration Guide
OneWireless R300 Wireless LAN Controller Configuration Guide
OneWireless R300 Network Planning an Installation Guide
iv
About This Document
Document ID
(This document)
34-SW-25-01
34-SW-25-01
SmartLine Wireless User's Manual
TM
Wireless Pressure
Revision Publication Date
Number
1 September 2018
2 October 2018
Doc #
34-SW-03-01
34-SW-03-02
34-SW-03-03
34-SW-03-04
34-SW-03-05
34-SW-03-06
34-SW-03-07
34-SW-03-08
OWDOC-X252-en-310A
OWDOC-X258-en-310
OWDOC-X256-en-310
OWDOC-X254-en-310
OWDOC-X259-en-300
OWDOC-X255-en-300
OWDOC-X253-en-300
Revision 2