Remote Sensor; Description; Safety Information - Honeywell E3Point User Manual

Description

3
The E Point Remote Sensor provides continuous monitoring for one of
the following gases in ambient air: CO, H
hazards. Connected to an E
protection (second location, different gas type).

Safety Information

Users of the E 3 Point Remote Sensor should fully understand the
installation, operating and maintenance instructions, otherwise protection
provided by the monitor may be impaired. Read the following warnings
before using the monitor.
W ARNING:
Install according to local electrical regulations and codes.
Installation should be performed by quali ed personnel.
Do not paint over the sensor screen.
Ensure the sensor screen is free of dirt and debris.
Ensure the sensor screen is not covered.
Do not expose the monitor to electrical shock or continuous mechanical
shock.
Do not expose the sensor to high pressure water spray.
Do not use the monitor if it is damaged. Inspect the monitor before
use. Look for cracks, missing metals, or plastics. If the monitor is
damaged, contact Honeywell Analytics immediately.
The warranty will be voided if the customer or any unauthorized service
personnel attempts to repair the unit.
E 3 Point Standalone Gas Monitor User Manual

Remote Sensor

S, O , NO
2 2
3
Point Standalone monitor, it provides dual
Remote Sensor
, and combustible
2
27