Standard Mounting Parts List - Honeywell E3Point User Manual

Speci cations

Standard Mounting Parts List

Item # Description
3
1 E Point cover
3
2 E Point housing base
3 Main sensor assembly
4 Large rectangular J-box (not included)
5 Captive screw 10-32 x ½ " (tamper proof screw also available)
To change a sensor cartridge, cut all power to the device and simply
pull out the "smart sensor" cartridge and press the replacement
cartridge into place. Be sure TOP/HAUT is toward the top of the unit.
Once the Smart Sensor is firmly in place, reconnect power. Use
caution when pressing the Smart Sensor cartridge into place to avoid
bending the pins.
See Alarm Menu
special instructions for changing sensor gas types.
36
Figure 11. Parts of the E
in the Using the Programming Menus, section for
3
E Point Standalone Gas Monitor User Manual
3
Point